Propellerhead Reason Spécifications Page 221

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 298
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 220
BV512 VOCODER
219
D Connect the gate outputs on a Redrum device to individual band
level inputs.
With this connection (and no device connected to the Modulator input), the
Redrum will serve as a pattern sequencer, opening and closing different fil-
ter bands. To adjust the gate times, set the drum sounds to Gate mode and
use the Length parameter. The result is totally different from using the audio
signal of the Redrum as modulator.
The vocoder bands are now solely controlled by the gate signals from the drum channels
- the modulator input isn’t used.
Note that you can use a Spider CV Merger & Splitter device to split a gate signal,
sending it to several bands. Also, note that the velocity of the programmed drum notes
govern the level of the corresponding filter bands.
“Playing” the vocoder from a MIDI keyboard
If you have routed MIDI to the BV512, playing notes from C1 and up will control
individual filter bands. For example, in 16 band mode, C1 controls band 1, C#1
band 2 and so on up to D#2 (which controls band 16).
The level of the bands is proportional to key velocity (how hard you play).
•A band will be “open” until you release the corresponding key.
Bands to which you have connected a CV signal (using the individual band
level inputs on the back panel) will not respond to MIDI keys.
Note that with this function, you “play the modulator”. You still need a carrier sig-
nal to get any sound. Typically, you would first record the notes or chords for the
carrier device in the sequencer, then route MIDI to the vocoder and “play” it from
your MIDI keyboard while playing back the recorded carrier notes.
An interesting application of this is to patch the vocoder as an in-
sert effect for the whole mix (the output of the main mixer con-
nected to the carrier input, with no modulator device connected),
and “play the vocoder”. Only the frequency bands for which you
press keys will be let through. Use the FFT (512) mode for best re-
sults.
Vue de la page 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 297 298

Commentaires sur ces manuels

Vikitvv 04 Jan 2024 | 13:04:50

urenrjrjkvnm

Evabhf 07 Jan 2024 | 16:01:45

Med

Viktoridbv 14 Jan 2024 | 00:33:23

Cinema