SUBTRACTOR SYNTHESIZER
117
Modulation Inputs
! Remember that CV connections will not be stored in the Subtractor
patch, even if the connections are to/from the same Subtractor de-
vice!
These control voltage (CV) inputs (with associated voltage trim pots), can mod-
ulate various Subtractor parameters from other devices, or from the modulation
outputs of the same Subtractor device. These inputs can control the following
parameters:
• Oscillator Pitch (both Osc 1 & 2).
• Oscillator Phase Offset (both Osc 1 & 2).
• FM Amount
• Filter 1 Cutoff
• Filter 1 Res
• Filter 2 Cutoff
• Amp Level
• Mod Wheel
Modulation Outputs
The Modulation outputs can be used to voltage control other devices, or other
parameters in the same Subtractor device. The Modulation Outputs are:
• Mod Envelope
• Filter Envelope
• LFO 1
Gate Inputs
These inputs can receive a CV signal to trigger the following envelopes. Note
that connecting to these inputs will override the normal triggering of the enve-
lopes. For example, if you connected an LFO output to the Gate Amp input, you
would not trigger the amp envelope by playing notes, as this is now controlled
by the LFO. In addition you would only hear the LFO triggering the envelope for
the notes that you hold down. The following Gate Inputs can be selected:
• Amp Envelope
• Filter Envelope
• Mod Envelope
urenrjrjkvnm
Med
Cinema