MALSTRÖM SYNTHESIZER
129
Both oscillators with one filter each
With this configuration, the signals from osc:A and osc:B will go to filter:A and
filter:B respectively, and then to the outputs.
Again, this configuration allows you to work in true stereo.
One oscillator with both filters in parallel
With this configuration, the signal from osc:A will go to both filter:A and filter:B,
with the filters in parallel.
! This configuration is only possible with osc:A. Osc:B can be routed
to both filters as well, but only in series (see below).
One or both oscillators with both filters in series
Osc:A routed through both filters in series. Osc:B routed through both filters in series.
With these configurations, the signal from osc:A and/or osc:B will go to both fil-
ter:A and filter:B, with the filters in series (one after the other).
Adding the shaper
The signal from one or both oscillators can also be routed to the shaper. The sig-
nal will then pass through the shaper to the outputs, with or without also passing
through the filters.
In the left figure, the signal from osc:A is routed to the shaper and then directly to the outputs.
In the right figure, the signal from osc:B is routed to filter:B, then to the shaper and then to
filter:A.
urenrjrjkvnm
Med
Cinema